Industry solution

RAD Torque
and Wind Energy Industry

Wind turbines look invincible from a distance. However, the majestic view of a wind farm spinning is far from the realities of keeping those wind turbines running safely and reliably.

The Demands of the Wind Industry

The constant vibration that wind turbines undergo means tower fasteners are always in danger of loosening. The dynamic loads on the always-moving components adds to the potential threat. Constant use also results in corrosion. And the efforts of wind industry engineers to build higher towers and design longer blades only increases the capacity for vibration and loosening.

In addition, safety is a key issue. Heavy components and tools add to the potential danger quotient. Heavy tools increase the risk of falling for workers doing their jobs high above the ground. And safety also comes into play when dealing with fasteners, since faulty bolting can result in drastic safety issues and increased costs.

RAD Meets the Needs of the Wind Industry

When it comes to heavy-duty bolting, wind turbine manufacturers, wind power construction and maintenance contractors, as well as utilities around the world, rely on RAD Torque Systems.

That’s because our wrenches are accurate, easy to use, lightweight, quick, and quiet. At RAD, we understand that the wind energy industry faces unique challenges, so we design tools to make technicians’ jobs easier.

We work with manufacturers like General Electric, Vestas, Siemens, Goldwin, and operators like Iberdrola, Nextera, and Morteson Construction, to meet torque needs at their facilities.

High Torque at High Heights

Trust RAD Torque to meet the unique demands of the wind energy industry. At RAD, we know that wind energy technicians require tools to get jobs done several hundred feet above the ground.

The E-RAD and B-RAD are extremely light in comparison to their hydraulic competitors and do not require a heavy pump. That means they are easier to transport up to and use on work platforms. But that doesn’t mean they compromise on torque strength.

It can take up to 120 bolts and up to 11,000 ft/lbs to connect a large diameter flange. The E-RAD is a continuous rotation tool and can complete a task like this in a much shorter time than a hydraulic wrench.

Unique Tools for a Unique Workplace

In some wind turbine towers, technicians have to flange sections from the inside. Other turbines have unique curvatures that do not allow for the use of straight tools.

RAD’s offset gearboxes and 90-degree tools allow an E-RAD to fit inside the diameter and curvature of a turbine’s shell, which means no job is out of reach – even on more challenging turbine designs.

The RAD Advantage

When it comes to bolting components for construction and maintenance of wind turbines, companies can rest assured that they have the best tools for the job. Our E-RAD, B-RAD, offset gearbox and Smart Sockets™ can be used to install and maintain tower bolts, blade bolts, shrink discs, gearboxes, generators, hub bolts, and yaw bolts.

How can you make sure your wind turbine operators are working with the right tools? Contact us today to talk about your site and your applications to see how our lightweight, high-torque tools can help make your job safer, more efficient, and more reliable.

WHAT OUR CLIENTS SAY

“On this last job, the Jumbo crew used the RAD Torque Systems E-RAD BLU 10K for the sea fastening process. The results they found were incredible. A job that used to take an hour with a hydraulic wrench now was reduced to 20 minutes using the E-RAD BLU torque wrench.”

-Diederik Bekkering, commercial director at Radial Torque Tools B.V.

RAD TORQUE SYSTEMS

AT WORK

Put rad torque to work for you

Let’s talk about how RAD Torque can make your worksite safer and more efficient.

Contact Rad